Regelbau R634 - Armoured Machine Gun Embrasure - Octeville-sur-Mer (printed)

This bunker was equipped with an armoured copula with six embrasures for machine guns.

The sides of the copula are 25 cm thick. The muzzle of the machine gun was mounted in a ball head which fitted exactly into the embrasures. When the embrasures were not in use, they could be closed with heavy shutters. In the top of the copula was a periscope for surveying the terrain around the bunker.

The copula is part of a type Regelbau 634 bunker. The walls and ceiling are 2m thick and offered the soldiers good protection against bombardment. In the bunker was an ammunition room and bunks for the crew of nine soldiers.

In the Iron tower there was a shooter and a helper to operate the MG 34 machine gun, which was mounted on a special foot (M.G.-Schartenlafette 34 Ks) and locked into the embrasure.

This bunker Type was designed by the Heer for 'The army'. This bunker Type is part of the Regelbau program in the Second World War.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

276mm x  288mm x  140mm  @  32mm (1/48) Scale

265mm x  276mm x  134mm  @ 28mm Scale

207mm x  216mm x  105mm  @ 1/64 Scale (Gaslands/Hotwheels)

184mm x  192mm x  93mm  @ 20mm (1/72) Scale

174mm x  182mm x  88mm  @ 1/76 (00 Railway) Scale

152mm x  159mm x  77mm  @ 1/87 (HO Railway) Scale

133mm x  138mm x  67mm  @ 15mm (1/100) Scale

83mm x  86mm x  42mm  @ 10mm (1-160) Scale

53mm x  55mm x  27mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.