Bauform 246 with Panzer Turret (printed)

The Bauform 246 was designed to mount the tank turret Vk 3001 (Pz.Kpfw.-Turm VK 30.01), the original documents state that four of these turret were build in the Atlantikwall and most were found in Normandy. 

 

The bunker with this turret was to have a supply of 168 rounds for the cannon and 21,000 rounds for the machine gun. The armor of the tower reached 50 mm in the front, side and rear parts, the ceiling was 15 mm thick. The height of the tower itself was about 1000 mm, the concrete foundation was about 330 mm high. One tower was tested, the rest were prepared. May 5, 1944, all 6 towers were to be mounted in concrete positions on the Atlantic Wall. However, only four towers were used. 14.9.1944 In Fest reports that two towers are to be located on the so-called Westwall (West Wall - defensive western line). These towers were reported on September 21, 1944 in the state of Höherer Pionier Kommandeur z.b.v. 4. Heeresgruppe B and Höherers Kommando Saarpfalz applied for a location and an order for the installation of those towers. In the report of March 26, 1945, all towers are kept in positions on the Atlantic Wall and the West Wall.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

260mm x  298mm x  156mm  @ 1/24 Scale
250mm x  286mm x  150mm  @1/25 Scale
179mm x  204mm x  107mm  @ 1/35 Scale
130mm x  149mm x  78mm  @  32mm (1/48) Scale
125mm x  143mm x  75mm  @ 28mm Scale
98mm x  112mm x  59mm  @ 1/64 Scale (Gaslands/Hotwheels)
87mm x  99mm x  52mm  @ 20mm (1/72) Scale
82mm x  94mm x  49mm  @ 1/76 (00 Railway) Scale
72mm x  82mm x  43mm  @ 1/87 (HO Railway) Scale
63mm x  72mm x  38mm  @ 15mm (1/100) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.