Studebaker US6 2.5 ton 6x6 (printed)

SKU
DT-PR-Studebaker2.5ton
As low as £10.99
In stock
Only %1 left

2.5 ton truck made in america and sent for lend lease around the world.

Studebaker US6 2.5 ton 6x6 (printed) is available to buy in increments of 1
Share
Login to earn Big D Tips for sharing!

Studebaker US6 2.5 ton 6x6 - Wargaming 3D Printed Model



This is a highly detailed 3D model of a Studebaker US6 2.5 ton 6x6 modelled by 3D fortress, prepared and distributed under license by Digital Taxidermy

 

The Studebaker US6 (G630) was a series of 2+1⁄2-ton 6×6 and 5-ton 6×4 trucks manufactured by the Studebaker Corporation and REO Motor Car Company during World War II. The basic cargo version was designed to transport a 2+1⁄2-short-ton (5,000 lb; 2,300 kg) cargo load over any type of terrain in any weather.

Most of these were exported to the Soviet Union under Lend-Lease by the USA during World War II, since the competing GMC 6×6 CCKW design proved to be more suitable for Western Front conditions.

In 1939–1940 the US Army Ordnance Corps was developing 2+1⁄2-short-ton (2,300 kg) tactical 6×6 trucks that could operate off-road in all weather. Studebaker, Yellow Coach (a GM company) and International Harvester all submitted designs that were accepted and went into production in 1941.


This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.
This is a Multi-part model.

The 3D printed WW2 model measures approx.:

397mm x  159mm x  159mm  @ 1/16 Scale RC tanks and models
318mm x  128mm x  128mm  @ 1/20 Scale
265mm x  106mm x  106mm  @ 1/24 Scale
254mm x  102mm x  102mm  @1/25 Scale
181mm x  73mm x  73mm  @ 1/35 Scale
132mm x  53mm x  53mm  @  32mm (1/48) Scale
127mm x  51mm x  51mm  @ 28mm Scale
99mm x  40mm x  40mm  @ 1/64 Scale (Gaslands/Hotwheels)
88mm x  35mm x  35mm  @ 20mm (1/72) Scale
84mm x  34mm x  34mm  @ 1/76 (00 Railway) Scale
73mm x  29mm x  29mm  @ 1/87 (HO Railway) Scale
64mm x  26mm x  26mm  @ 15mm (1/100) Scale


This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.


This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

This Model is designed for WW2 table top games such as:

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.
Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.


Brand 3D Fortress
Designer 3D Fortress
Print Material Resin
Genre WW2
Use Resin
Vehicle Type Non Vehicle
Only registered users can write reviews. Please Sign in or create an account

No Other Seller Selling this Product